The way to mix ozone into water
Ⅰ、Using injector (ventury) – a special design “T” in witch water rushing trough
the straight part of the “T” creates a suction in the 3rd port trough ozone is
introduced. Mixing process utilizing injector is far more effective then A & B,
however additional pump is usually used to deliver the energy for water flow and
pressure needed for correct operation of injector. Needless to say, injectors are
produced from different materials in different sizes.
1、 Plastic injector(for ozone and water mixing)
Stoutness, ozone resistant Kynar,PVDF material,small specs,use convenience
|Water in/out diameter (mm)
||DN20 (2/8 inch)
||DN20 (4/8 inch)
||DN20 (6/8 inch)
||DN25 (1 inch)
||DN50 (2 inch)
2、Strong mixer for gas and water—(stainless steel)
||Deal with water
||Water in/out diameter
Ⅱ、Gas- liquid mixing pump
Ⅲ、High efficiency mixing tank—-perfect mixing method. applied for CoCa and etc. big company.
As with the same ozone generator, this kind mixing tank keep a high ozone water mixing ratio
.ozone concetration can be up to 10ppm.
Diameter is 600mm, 800mm,1000mm,1200mm,1500mm,, H=2500mm, stainless steel is 304,
(316 optional), thickness is more than 2.5mm.
Mixing tank water inlet and outlet is DN50-DN200, auto air outlet is 1/2”.